Feed Values for Grooving Widia Separator X2 and X2-Ultra This insert has the same geometry as the WMT-SX Chip control geometry offers the widest ra

Feed Values for Grooving Widia Separator X2 and X2-Ultra This insert has the same geometry as the WMT-SX Chip control geometry offers the widest range of speed and feed capabilities and provides excellent flatness and finish. This chipbreaker cuts with the least amount of tool pressure, extending tool life. The geometry also includes wipers and a corner radius. This geometry works well on a variety of materials. This insert has the same geometry as the WMT-SX-Ultra. The X-Ultra is an enhanced version of the X2 and is ideal for stainless steels, nickel-based alloys, tool steel, INCONEL and titanium. X2-Ultra Separator S2 and S2-Ultra High positive rake with a more open chipbreaker enables increased speeds and feeds for moderate- to high-speed applications. The geometry includes wipers and a corner radius that provides superior flatness and finish. This insert is also available with sharp corners. Its greatest strengths can be seen on stainless steels and soft gummy steels. The S2-Ultra is an enhanced version of the S2 and is ideal for 300 series stainless steels, nickel-based alloys, tool steel, INCONEL, and titanium at moderate to high speeds and feeds. S2-Ultra Separator Classic and F2 Classic A good general-purpose insert for carbon steels, alloy steels, and most stainless steels. The Separator Classic chipbreaker is designed to perform well at moderate to slow speeds and feeds. The Classic provides standard high lead angles and sharp corners, making it the first choice when choosing an insert for nib-free cut-off. This insert provides superior flatness and finish on a wide variety of materials Ideal for thick wall parts or cutting off larger diameter parts to centre. The Separator F2 performs well at slow to moderate speeds and feeds. Separator Inserts