49 Каталог KYOCERA 2019 Режущий инструмент для металлообработки на станках Стр.B13

Каталог KYOCERA 2019 Режущий инструмент по металлу Стр. B13 0049 Lab2u

CHIPBREAKER SELECTION (positive inserts) Steel Ground Chipbreaker A Good chip control during finishing to light machining with low cutting forces. Good chip control during finishing to light machining with low cutting forces. Chipbreaker smoothly breaks chips and directs them towards the outside of the workpiece when boring. Sharp cutting performance and good surface finish. Sharp cutting performance and good surface finish. Slant chipbreaker width provides chip control at various D.O.C.. Good chip control at low feed rates and varied D.O.C. with low cutting force. Suitable for automatic lathes. A Large rake angle and low cutting force. Narrow chipbreaker width and consistent chip control. General purpose chipbreaker for medium machining. Good balance between chip control and sharp cutting. Applicable to high load machining. Good chip flow and less resistance. i t Sharp cutting performance and small curled chips. i Specification of A, B, C and parallel ground chipbreaker Insert Type Size Chipbreaker Name LBB (in) GAN R On) TPGR 1/4 A 0.040 17° 0.020 1/4, 3/8 B 0.060 14° 0.020 3/8 C 0.087 14° 0.040 SPGR 3/8 Without Indication (Similar to B) 0.060 14° 0.020 1/2 Without Indication (Similar to C) 0.087 14° 0.040 O cz I- T> O m = H K Applicable Chipbreaker Range (D.O.C. Refers to Radial Depth of Cut) M .002 .004 .006 Feed Rate (ipr) .16 .12 (1/4”I.C. Steel) U/l (3/16”, 7/32” I.C.: Steel) (5/32” I.C.: Steel) O .04 - O Q .004 .008 .012 .016 Feed Rate (ipr) 7 7l .004 .008 .012 .016 Feed Rate (ipr) (3/8”I.C. Steel) . J / JSF - F/FSF (Steel) .002 .004 .006 .0 Feed Rate (ipr) .004 .008 .012 .016 Feed Rate (ipr) Feed Rate (ipr) (1/4”, 3/8” I.C.: 5 H (1/4" I.C.) H (3/8"I.C.) .004 .008 .012 .016 Feed Rate (ipr) N Visit us online at Kyocera B13