The new -FS and -MS geometries from Widia are specifically designed for use in high-temperature alloys, nickel-based (INCONEL Udimet Rene) material

The new -FS and -MS geometries from Widia are specifically designed for use in high-temperature alloys, nickel-based (INCONEL Udimet Rene) materials, cobalt-based (Haynes ), Fe-based (Airmet 100) materials, titanium and titanium alloys, as well as difficult-to-machine stainless (460SS, duplex, high-alloy stainless), cobalt-chrome, and stainless-based powdered metals. .GG-FS Geometry All GG-FS inserts are periphery ground to provide a G tolerance. This is a critical in some applications, especially in the aerospace industry. Precision grinding provides a high quality cutting edge which reduces depth-of-cut notching and delivers consistent surface quality in finishing applications. Be more productive by utilising the higher speed capability provided by the latest in PVD coating technology and optimised post-coat treatment. Achieve better tool life through the high positive rake angle which reduces cutting forces and built-up edge. MG-MS Geometry High positive rake angle delivers improved tool life by reducing cutting forces and built-up edge when machining high-temp alloys. Improved chip control and reduced crater wear due to proprietary chipbreakers with varying shapes and distances. Reduced thermal wear and cracking due to near sharp cutting edge with optimised edge treatment. Improved chipbreaking at various depths of cut due to variable land width, which improves impact strength. All MG-MS inserts are moulded, which supports increased tool life due to the elimination of grinding stress. Widia To learn more, contact your local Authorised Distributor or visit \VICTORY High-Temp