EXTERNAL MICROMETERS TESA Angle can be locked using a single bolt Lacquered cast iron base Clamp aperture 16 mm (TESA) or 20 mm (ETALON) Micrometer St

EXTERNAL MICROMETERS TESA Angle can be locked using a single bolt. Lacquered cast iron base Clamp aperture 16 mm (TESA) or 20 mm (ETALON) Micrometer Stands For external micrometers up to 300 mm as well as many other hand-held tools. Technology 00160201 TESA micrometer stand with clamp aperture 16 mm 072110123 ETALON micrometer stand with clamp aperture 20 mm o Length tolerance with reference to the nominal dimension 100 pm Each set is supplied in a wooden case Declaration of conformity Flatness tolerances for optical parallels with lengths 27335 mm 015 pm 5200 t 77335 mm 02 pm Tolerances in parallelism for optical parallels with lengths 27335 mm 04 pm 5200 t 77335 mm 05 pm 31 mm Optical Flats with Two Parallel Faces Used for examining the flatness and parallelism of the measuring faces on external micrometers as well as other similar measuring instruments. The difference in length of the optical flats within a set matches a quarter or a third of the spindle pitch of 05 mm. Q e 02510000 Set interference glass 12 t 12375 mm 02510001 Interference glass 12 02510002 Interference glass 12125 02510003 Interference glass 1225 mm 02510004 Interference glass 12375 mm 02510100 Set interference glass 27 t 27335 mm 02510101 Interference glass 27 mm 02510102 Interference glass 27165 mm 02510103 Interference glass 27335 mm 02510200 Set interference glass 52 523 02510201 Interference glass 52 mm 02510202 Interference glass 52165 mm 02510203 Interference glass 52335 mm 02510300 Set interference glass 77 t 77335 mm 02510301 Interference glass 7700 mm 02510302 Interference glass 77165 mm 02510303 Interference glass 77335 mm G mm 12.00 t 12375 12.00 12125 1225 12375 27.00 t 27335 27.00 27.165 27.335 52.00 t 52335 52.00 52.165 52.335 77.00 t 77335 77.00 77.165 77.335 TESA