Three grade s and seven primary geometries for use in roughing to finishing operations Increase cutting speed and/or feed rate to gain productivity

Three grade s and seven primary geometries for use in roughing to finishing operations. Increase cutting speed and/or feed rate to gain productivity. toughness WK Grades for Cast Iron Three grade s across 12 geometries for use in roughing to finishing operations. Very good balance of wear resistance and toughness for long predictable tool life. Flat top geometry for machining cast iron. For finishing to roughing applications. toughness toughness WM Grades for Stainless Steel Two grade s to cover all of your cast iron turning operations. Increase cutting speed and/or feed rate by up to 30% over similar competitive grade s. toughness WS Grades for High-Temp Alloys Two grade s for use in roughing to finishing operations. Very good wear resistance for longer tool life. One uncoated grade for use in titanium. Positive and Negative Inserts Positive Inserts Negative Inserts Screw-on inserts are the first choice for I.D. turning of all materials and O.D. turning on small to medium lathes. 1 Suitable for all workpiece materials. Negative style inserts are your first choice for general machining of all materials on medium to large lathes. Negative style inserts offer the best economy for high metal removal rates. Available in flat-top and chip-control geometries with both moulded and ground peripheries. Suitable for all workpiece materials. Ceramic Inserts PcBN and PCD Inserts Ceramic inserts are a great choice for productive machining of high-temp alloys. Negative rake inserts are also recommended for the machining of hardened materials and cast irons. Available in flat-top geometries with moulded and ground peripheries. 1 PcBN can be used for machining steels with a hardness higher than 48 HRC. 1 PcBN inserts can also be used for productivity improvements in machining cast irons and high-temp alloys. 1 PCD inserts are used for machining non-ferrous materials. Widia Inserts Widia Victory Toughness/Wear Resistance r WP15CT WS10PT K WP35CT A WP Grades for Steel